Updated at: 24-05-2022 - By: Jane

There are few things more frustrating than going to sleep and waking up to find your mattress dangling precariously from your bed frame.

Despite the fact that this may not seem like a major problem, a shifted bed can lead to a lack of sleep and a weakened immune system.

When a bed shifts, it could be because the cover lacks friction, or because your product is old and in need of a refresh.

There’s no need to sacrifice sleep once you discover how to keep your mattress from slipping.

Why Do We Toss and Turn All Night?

However, there are ways to alleviate the problem of a bed falling off the foundation. In order to have a solid foundation, it is necessary to take into consideration a wide range of aspects. Let’s have a look at all the possible causes of this and what you may do to alleviate the problem.

Illustration of a Man Who Suffers from REM Sleep Behavior Disorder

Why Is My Mattress Sliding?

Identifying the cause of the slipping of your mattress surface is an important first step in solving the problem. The design of the bed frame or even the age and condition of the mattress could be to blame.

Mattress shifting is most likely caused by one or more of the following:

  • When we sleep, our bodies secrete oils, sweat, and other secretions that can accumulate over time and contribute to a sagging sleeping surface. It’s not a nice thought. If you’ve been sleeping on the same mattress for seven years or more, it’s probably time for a new one. If you suspect you have a faulty mattress, there are a number of obvious signs and symptoms to keep an eye out for.
  • Mattress dimensions – It is critical that the mattress is the correct size for the bed frame. Mattresses that are too tiny for their frames are more likely to fall off of the bed and onto the floor. If you’ve been stuffing your king bed frame with a queen size mattress and hoping for the best, it’s time to remedy the situation with the right mattress size.
  • Choosing the right mattress size is critical to the overall comfort of the bed. An undersized mattress will be more prone to slipping out of the frame’s corners than an oversized one. If you’ve been hoping for the best by cramming a queen-sized mattress into a king-sized bed frame, it’s time to upgrade to the correct mattress size.
  • Railing is not necessary – While bed frames without railings may be visually appealing as a horse pen, mattresses, like horses, can be more prone to wandering. Railing can help your mattress hold its own if you toss and flip in your sleep.
  • If your mattress is slipping, it could be due to a lack of friction. Latex and memory foam mattresses have a reputation for being less stable than other mattress varieties. When it comes to Casper mattresses, we make sure they have enough traction, but if you’re using a different brand, the material may be to blame.

How to Keep Mattress from Sliding

Is there a solution to your mattress slipping and sliding at night?

If you’re having trouble with your mattress slipping around as you sleep, here are six quick fixes that will help you get back to restful sleep and stay put.

# 1 Rug Pad Grippers

To keep a mattress from sliding, you can use the same rubber pads that keep floor rugs in place under your feet. It’s a low-risk, high-reward investment to check out these handy aids, which come in a range of sizes and are reasonably inexpensive.

As long as the mattress is supported by slats or any other type of bed platform, the rubber pad grippers are all that is needed.

#2 Non-slip Mattress Pads

Non-slip mattress pads are a terrific method to keep your mattress from shifting about on the bed. For one thing, they’re more durable and come in conventional mattress sizes such as twin, queen, or full because they’re created expressly for the bed. In contrast to a mattress cover or an encasement, a mattress pad can even increase the cushioning on the mattress’s surface.

#3 Velcro Tape

If you’ve ever thought about using Velcro strips to keep your mattress in place, you’re not alone. Using velcro strips to secure your mattress to your bed frame is a simple and low-cost solution to prevent it from sliding about the bed.

#4 Vacuum

The dust bunnies under your bed aren’t as innocent as their moniker would lead you to believe. A mattress that has accumulated dust on it, as well as the bed frame, is more prone to slipping. 2

For a quick fix, use your vacuum’s mattress or upholstery attachment.

#5 Add Railing

With the right circumstances, installing a railing to your bed frame may be a viable option for keeping your mattress in place. You can either buy an adjustable railing or create one yourself if you’re handy.

#6 Mattress Extenders and Gap Fillers

It’s possible to fill the additional space in your mattress without having to buy a new one if your mattress is too small for your frame.

Using stuffing or other padding can provide a temporary solution while mattress extenders or gap fillers can help you get the length or width you require.

How to Keep a Mattress From Sliding: 6 Easy Hacks | Casper

How to Keep the Mattress From Sliding on a Metal bed Frame

If you’re still bothered by a wandering mattress after using carpet tape, velcro, rubber mats, and vacuuming, you may need to try something else. Side rails are usually the greatest solution when dealing with a metal bed frame. You may make them yourself if you’re feeling creative.

With the use of elastic straps, you can keep your bed from shifting while you sleep. To secure the mattress, remove the sheets and wrap the straps over the mattress and the base of the bed. If you’re using a mattress topper, make sure to tuck the straps under the topper to prevent dents in the foam.

How to Keep the Mattress From Sliding of a Box Spring

Because box springs cannot be fitted with bed rails, the only options when dealing with them are velcro, carpet tape, rubber mats, and vacuuming. If everything else fails, a non-slip mattress may be a possible choice, or positioning your bed against the wall may assist a little.

How to Keep the Mattress From Sliding on a Platform bed

You must use the proper bed base to keep your mattress from sliding about on your platform bed. It’s possible that your mattress will move about if it’s too large for your bed frame. Carpet anti-slip pads are a low-cost but efficient solution to the problem of your mattress slipping.

Mattress straps may also be an option, but keep in mind that if you have a foam mattress, you don’t want to permanently dent it.

Tips on how to Keep the Mattress From Sliding

To avoid scrapes on your legs as you get out of bed, make sure your mattress fits the bed’s frame and isn’t too big or too little for it. Consider these tips to keep your mattress from slipping:

  • Vacuuming the entire bed and frame or using velcro, rubber mats, carpet tape
  • There are electronic bed bases that are constructed of metal and are extremely long-lasting that may be used indefinitely if your mattress doesn’t fit the frame of your bed.
  • Consider purchasing a new pressure-relieving mattress for your sleep health if your current one is over 10 years old because it will provide additional comfort and stability.


Have you ever awoken feeling invincible after a restful night’s sleep and realized how important it is to take care of your sleep health? Every morning, you should wake up feeling like that. Having to adjust your mattress every morning when you get out of bed could disrupt your sleep and lead to insomnia, as well as being an irritation.

Unnecessary tension like this can aggravate you. A mattress stopper can help you get a good night’s rest tonight if you follow these instructions.


How to Stop Mattress from Sliding?

To stop your mattress from slipping, just place a rubber mat or a non-slip cushion under the mattress. To hold carpets and rugs in place, these pads and mats can be obtained at home improvement stores or furniture stores. They can also be used as a mattress stopper.

How to Keep Mattress From Sliding on Platform Bed?

Use the right bed base if you want to keep your mattress in place on a platform bed. There are times when a mattress that is too large for the bed frame can cause it to move around. There is a simple and inexpensive remedy if your mattress keeps moving: anti-slip carpet pads.

How to Keep Memory Foam Mattress From Sliding?

It’s possible that your memory foam mattress is too big for your bed frame if it’s always sliding about. Carpet tape, velcro, and straps can also be used to secure a mattress to a bed frame. These methods, however, may not be ideal for memory foam mattresses, as they may compromise the foam’s structural integrity. It’s possible that a sturdy bed frame will do the trick.

How to stop mattress topper from sliding

One option is to attach the foundation to the cushion with velcro tape, which can be applied to the foundation’s edges and center. In order to keep the mattress topper from sliding about, you might place a non-slip pad between them. To hold your topper and cushion in place if neither of those options appeals to you, you can use sheet straps or suspenders to secure them.

How to Keep Mattress From Sliding on Metal Bed Frame?

Your mattress may be too big for your metal bed frame if it continues sliding around on it. It is possible to add side rails to the bed and make them yourself in this case. If the mattress keeps slipping, you can use straps. Tightly bind the staps under the bedsheets so they don’t move around during sleep.

How to Keep Mattress from Sliding - Easy Tips That Actually Work!

How to Keep box Spring from Slipping off Frame?

If you have a box spring, velcro, carpet tape, rubber mats, vacuuming, and positioning your bed against the wall could be possible options to keep your mattress from sliding. Since rails cannot be installed on a box spring, the only option left is to purchase a nonslip mattress.

Are box springs necessary?

A box spring isn’t necessary for memory foam and latex mattresses, although innersprings and hybrids may benefit from one. Before buying a new bed, check with the manufacturer.

Does a mattress need a frame?

If you like to keep your mattress and base off the ground, a bed frame may be necessary.

Can I put my bed on the floor?

If you place your mattress on the floor, you run the risk of encouraging mold and mildew growth. If your mattress is damaged in any way, you may lose your warranty.

How do I keep my adjustable bed from sliding?

Adjustable beds have a tendency to slouch as they rise. Choose beds with technology that keeps the mattress up against the wall, so your nightstand is within reach, to avoid this problem.

Why does my mattress slide off the box spring?

There’s a chance your mattress isn’t going to fit in your bed frame. This extra room is necessary to accommodate the mattress and box spring, but too much of it can cause the mattress to fall off.

What do you think?

Rate this post